Turf Tank One robotic line marker on a grass pitch. Photo: Mark Tomlinson, Bio-Circle

Edge Paint Nozzle and Coverage Guide: Robots, Hybrid and Fusion

Edge is our ready-to-use paint for robotic and pedestrian spray markers, in a recyclable 10L bag-in-box. How far each box goes depends on your machine and nozzle. Here are the settings we recommend.

Robotic markers

Turf Tank One robotic line marker on a grass pitch

A Turf Tank One robotic line marker. Photo: Mark Tomlinson, Bio-Circle.

Use a Pitchmark stainless steel No. 4 or a Green Misting nozzle on the Fast or Contractor setting.

Coverage: 4 full-size football pitches per 10L box.

Tiny Mobile Robots line marker

A Tiny Mobile Robots line marker. Photo: Mark Tomlinson, Bio-Circle.

Hybrid and Fusion

Choose the nozzle to suit the job. A bigger nozzle lays a heavier line for initial marking; a smaller one stretches the paint further for over-marking.

Nozzle Paint per pitch Pitches per 10L box Best for
Stainless steel No. 6 3L About 3 Initial marking, heaviest line
Stainless steel No. 4 or Green Misting 2.5L 4 Everyday marking (recommended)
Stainless steel No. 3 2L 5 Over-marking existing lines
Stainless steel No. 2 1.7L About 6 Light over-marking, lowest paint use

Figures are for full-size football pitches.

Rugby pitches

Rugby pitches have more lines, so expect fewer per box. With a stainless steel No. 4 or Green Misting nozzle, one 10L box of Edge marks 2 rugby pitches.

Quick reference

  • Robot, football: No. 4 or Green, Fast/Contractor setting. 4 pitches per box.
  • Hybrid/Fusion, football: No. 4 or Green to start. Go up to No. 6 for a heavier line, or down to No. 3 or No. 2 to make the box go further.
  • Rugby: No. 4 or Green. 2 pitches per box.

Edge is not for flat fan nozzles. See the nozzle guide for filters and caps, or WhatsApp John on 086 817 4112 for help setting up. Free next-day delivery to all 32 counties.

Shop Edge → Nozzle Guide →

Thank you to Mark Tomlinson of Bio-Circle for kindly giving us permission to use his photographs in this article.

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.